|

Where only a wooden tower is required, or as an addition to another PlayCentre the Arundel Tower only is ideal. For stability purposes this tower must be concreted into the ground.
Action climbing frames use selected top grade pine from forests approved and managed under the Programe for the Endorsement of Forest Certification scheme (PEFC). The seasoned timber is machined, planed smooth with rounded edges and finished within 1mm tolerances.
All fixing holes and nut recesses are pre-drilled and then the timber is pressure treated to preserve life, using a non-toxic chromium/cadmium/arsenic (CCA) free solution approved for childrens playground equipment.
All bolts, fittings, fasteners are either galvanised or stainless steel to prevent rust. The galvanised swing hangers have low noise nylon bearings.
Detailed assembly instructions and all necessary fittings are provided to make construction a straight-forward DIY job.
Please note that the dimensions supplied correspond to the layout in the photos, and will change if you chose to assemble the unit in a different configuration.
Overall Length: 0.97m (3ft 2in) Overall Depth: 0.90m (2ft 11in) Overall Height: 3.20m (10ft 6in)
Deck Length: 90cm (3ft) Deck Width: 90cm (3ft) Deck Height: 1.50m (5ft)
Assembly Guide: 2 Adults - 5 Hours
Features
 90cm (3ft) square wooden tower 3.2m high Wooden Roof 90cm (3ft) square wooden platform 1.5m high Wooden climbing rungs 3m (10ft) green wave slide Sandpit with two seats
Warranty
 10 year against wood rot and insect infestation. 1 year on all ropes, accessories, slides and workmanship. CE Marked BS 5665 / EN71 |